Cân tỷ trọng DME Shinko Vibra có model: DME-220E, DME-220HE
Hãng sản xuất: Shinko Vibra
Xuất sứ: Nhật Bản
*Phù hợp các tiêu chuẩn:
- JIS K6268, JIS K6350 (Cao su)
- JIS K7112 (Nhựa)
- ASTM D297-93-16 (Cao su)
- ASTM D792 – OO (Nhựa)
Amazing precision and performance!
Unique test-tank & housing-architecture.
Relative Density measurement for the Rubber & Plastic. Suitable for the quality control!
Test-tank & Housing-architecture Protected the measuring against Over-load and Wind.
Tuning-fork sensor adopted to the Subaru telescope (most accurate optical telescope) is used. Realize High Quality and High Precision 0.01g.
Change the weighing-pan, could be used as Precision balance 600g/0.01g.
High-accurate weighing is maintained by built-in reference weight. (DME-220H only)
* Change the weighing-pan, it can be used as usual precision electronic balance.
1. The water temperature measuring and storing
Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by the refenence water temperature.
2. Weight a sample in the air, and storing
Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.
3. Weight a sample in the water, and storing
Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the balance the weight data.
4. The relative density and volume indication
The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.
Hydrometer Kit. (Option)
In case of the lighter sample than the water
Cover the sample with attached Underwater Sample Holder, and measure it.
Model Readability (density) Readability (volume) Hydrometer option Data store condition Calibration
DME-220E 0.01g 0.01cm3 Not-avairable Fixed condition External reference weight
DME-220HE 0.001/0.01g 0.001/0.01cm3 Option 3 type selectable Built-in Weight
(density measurement) 220g
(weight measurement) 600g
Measuring method Underwater Replacement Method (JIS Z8807)
Printer Output Standard
Size 230 × 180 × 170mm
(12 Hour Charge, 32 Hour Operable)
* Battery cannot be used with the output as same time.
Hydrometer Kit (For DME-220H only
Tag: cân tỷ trọng DME Shiko Vibra, can ty trong DME Shiko Vibra,, can dien tu DME Shiko Vibra, cân điện tử DME Shiko Vibra, can ky thuat DME Shiko Vibra,, cân kỹ thuật DME Shiko Vibra
Xin chân thành cảm ơn Quý Khách hàng đã quan tâm sản phẩm và sử dụng!