CMCP7504 Four Channel Machinery Monitoring System-STI Vietnam-TMP Vietnam

Công ty Tăng Minh Phát Việt Nam là Nhà phân phối của hãng STI tại Việt Nam. Chúng tôi chuyên cung cấp CMCP786A-I General Purpose, Top Exit chính hãng STI giá cạnh tranh

100mV/g ±10%
Integral Stainless Steel Overbraided Cable
1.5Hz to 12kHz (90 to 720k cpm)
2 Second Setting Time
-67 to +284° F (-55 to 140° C)
1/4" x 28 UNF Mounting Stud
Class I Division II Approved
Lifetime Warranty
Features:
Sensitivity: 100mV/g ±10%
Mounting: 1/4"-28 UNF Male (Adapters Available)
Frequency Response (±3dB): 0.8Hz to 15kHz (48 to 900k CPM)
Dyanamic Range: ±80 g, peak
Setting Time: 2 Seconds
Power Requirements: 18-30 VDC
Temperature Range: -67 to 284°F (-55 to 140°C)
Case Material: 316L Stainless Steel
Connection: Stainless Steel Overbraided ETFE Cable
Approvals: CSA/UL Class I Division II Approved, Groups B, C,D
Warranty: Lifetime Quality Warranty


Chúng tôi cung cấp đầy đủ thiết bị từ hãng STI:



CMCP785A General Purpose, Side Exit

100mV/g ±10%

2 Pin MS Connector, Side Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

CMCP786A General Purpose, Top Exit

100mV/g ±10%

2 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

CMCP787A Premium, Side Exit

100mV/g ±10%

2 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

1 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

CMCP788A Premium, Top Exit

100mV/g ±5%

2 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

1 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

Integral Cable



CMCP1100 Low Cost Accelerometer

Low Cost

100mV/g ±10%

0.32 Hz to 10 kHz (19.2 to 600k cpm)

-65 to +185°F (-54 to 85°C)

Top Exit Integral Cable

1/4"x28 UNF Mounting Stud

1.5 Second Settling Time

0.5" Diameter

CMCP1100HT High Temp Accelerometer

High Temperature

Small 1/2" Footprint

Top Exit

100 mv/g 10%

0.32 Hz to 10 kHz

-65 to +250° Deg. F

-54 to 121 Deg. C

Integral Cable

1/4" x 28 UNF Stud

CMCP1100S Low Cost Accelerometer

General Purpose

Small 1/2" Footprint

Side Exit

100 mV/g 10%

0.32 Hz to 10 kHz

-65 to 185 Deg. F

-54 to 85 Deg. C

Integral Cable

1/4"x28 UNF Stud

CMCP785A-I General Purpose, Side Exit

100mV/g ±10%

2 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

CMCP786A-I General Purpose, Top Exit

100mV/g ±10%

Integral Stainless Steel Overbraided Cable

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

CMCP787A-I Premium, Side Exit

100mV/g ±5%

2 Pin MS Connector, Side Exit

1.5Hz to 12kHz (90 to 720k cpm)

1 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

CMCP788A-I Premium, Top Exit

100mV/g ±10%

Integral Stainless Steel Overbraided Cable

1.5Hz to 12kHz (90 to 720k cpm)

1 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

Compact



CMCP1100C Compact, M8 Connector

100mV/g ±10%

3 Pin M8, Top Exit

0.32Hz to 10kHz (19.2 to 600k cpm)

2.5 Second Setting Time

-65 to +185° F (-54 to 85° C)

1/4" x 28 UNF Mounting Stud

CMCP770A Compact, Top Exit

100mV/g ±10%

2 Pin MS Connector, Top Exit

0.8Hz to 19kHz (48 to 1,140k cpm)

1 Second Setting Time

-67 to +266° F (-55 to 130° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

CMCP780A Compact, Side Exit

100mV/g ±10%

2 Pin MS Connector, Side Exit

0.8Hz to 19kHz (48 to 1,140k cpm)

1 Second Setting Time

-67 to +266° F (-55 to 130° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

Dual Output



CMCP785T Dual Output, Side Exit

100mV/g ±10%

10mV/°C Temperature Output

3 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

Lifetime Warranty

CMCP786T Dual Output, Top Exit

100mV/g ±10%

10mV/°C Temperature Output

2 Pin MS Connector, Top Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

Lifetime Warranty

Biaxial/Triaxial



CMCP1300A Triaxial Accelerometer

Low Cost

100mV/g ±10%

4 Pin MS Connector

0.32Hz to 10kHz (19.2 to 600k CPM)

2 Second Settling Time

1/4"-28 UNF Captive Bolt

Lightweight Aluminum Case

CMCP760T Triaxial, Side Exit



100mV/g ±10%

4 Pin M12, Side Exit

1.5Hz to 12kHz (90 to 720k cpm)

2 Second Setting Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Lifetime Warranty

Piezo Velocity



CMCP793V Top Exit Velocity Transducer

100 mV/In/Sec ±10%

2 Pin MS Connector, Top Exit

2 to 8kHz Frequency Response

2 Second Settling Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

CMCP793V-500 Piezo-Velocity, Top Exit



500 mV/In/Sec ±10%

2 Pin MS Connector, Top Exit

2 to 8kHz Frequency Response

2 Second Settling Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Mounting Stud

Class I Division II Approved

CMCP797V Piezo Velocity, Side Exit

100 mV/In/Sec ±10%

2 Pin MS Connector, Side Exit

2 to 8kHz Frequency Response

2 Second Settling Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

CMCP797V-500 Piezo-Velocity, Side Exit



500 mV/In/Sec ±10%

2 Pin MS Connector, Side Exit

2 to 8kHz Frequency Response

2 Second Settling Time

-67 to +284° F (-55 to 140° C)

1/4" x 28 UNF Captive Bolt

Class I Division II Approved

4-20 mA Sensors (accelerometer and transmitter combined into one housing)



CMCP420VT Loop-Powered Vibration Transmitter

Integral Sensor

4-20 mA Output

Dynamic Signal Output

UL and CSA Approved Class 1, Division 2, Group B-D

CE Approved

RoHS Compliant

CMCP420VT-T Dual Parameter Loop-Powered Vibration and Temperature Transmitter

Dual Parameter (Vibration and Temperature)

Solid State Reliability

2-Wire Loop Powered (4-20 mA)

3/4" NPT for Conduit Connections

Industry Standard 1/4"x 28 UNF Stud Mounting

Optional Display

UL and CSA Approved Class 1, Division 2, Group B-D

CE Approved

RoHS Compliant

CMCP422VT Series Loop Powered Velocity Transmitter (4-20mA)

Low Cost

Vibration Velocity RMS or Peak Detection

Top Exit 2 Pin Mil-Spec 5015 Connector

Optional 5 Meter Armored Integral Cable

Rugged Design

Loop Powered 4-20 mA

Interfaces Directly to PLC/DCS Systems

Two Ranges Available

Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C)

1/4" x 28 UNF Mounting Stud

Optional Armored Integral Cable

CMCP422VTS Series Loop Powered Side Exit Velocity Transmitter (4-20mA)

Low Cost

Vibration Velocity RMS or Peak Detection

Side Exit 2 Pin Mil-Spec 5015 Connector

3 Connector Options

Rugged Design

Loop Powered 4-20 mA

Interfaces Directly to PLC/DCS Systems

Two Ranges Available

Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C)

1/4" x 28 UNF Mounting Stud

Optional Armored Integral Cable

CMCP422AT Series Loop Powered Acceleration Transmitter (4-20mA)

Low Cost

Vibration Acceleration RMS or Peak Detection

Top Exit 2 Pin Mil-Spec 5015 Connector

Optional 5 Meter Armored Integral Cable

Rugged Design

Loop Powered 4-20 mA

Interfaces Directly to PLC/DCS Systems

Two Ranges Available

Operating Temperature Range: -13 to + 194 degrees F (-25 to 90 degrees C)

1/4" x 28 UNF Mounting Stud

CMCP422ATS Series Loop Powered Side Exit Acceleration Transmitter (4-20mA)

Low Cost

Vibration Acceleration RMS or Peak Detection

Top Exit 2 Pin Mil-Spec 5015 Connector

Optional 5 Meter Armored Integral Cable

Rugged Design

Loop Powered 4-20 mA

Interfaces Directly to PLC/DCS Systems

Two Ranges Available

Operating Temperature Range: -13 to +194 degrees F (-25 to 90 degrees C)

1/4" x 28 UNF Mounting Stud

CMCP423VTA Compact Vibration Switch

Low Cost, Compact Vibration Switch

4-20mA and Relay Output

Vibration Velocity RMS

1.0 or 2.0 Ranges (25.4 or 50.8mm/sec)

10 to 1kHz Frequency Response

Adjustable Alarm Level (0-100% Full Scale)

Adjustable Time Delay (0-60 Seconds)

Locking Adjustments

4 Pin Eurofast Connector

IP67 Rated

CMCP420XPHD Explosion Proof Head for CMCP420VT



Explosion Proof Head for CMCP420VT Loop Powered Transmitter. The CMCP420VT Transmitter equipped with the CMCP420XP Explosion Proof Head will make it rated for Class I Division I areas.

CMCP420BNC BNC Adapter for CMCP420VT

90 Degree 3/4” NPT conduit elbow with a BNC connector to access the raw acceleration signal. This is useful for connection to portable data collectors.

CMCP420EL 90 Degree 3/4" x 3/4" NPT Elbow for CMCP420VT



Accessory for the CMCP420VT Series Vibration Transmitters

Useful for connecting CMCP420VT to hard or flexible conduit. When used with the CMCP420-WF, provides a simple weatherproof exit for the instrument wire.

CMCP420LED/LCD Display

The display for the CMCP420VT is loop powered display that shows the actual vibration levels in velocity on an easy to read LCD or LED display. The display also includes a BNC connector that provides access to the raw acceleration signal. This is useful for connection to portable data collectors. The temperature readout is designed for use with the CMCP420VT-T Dual Parameter Vibration and Temperature Transmitter. The temperature display does not include a BNC output.

CMCP420WF 3/4" NPT Weatherproof Cable Fitting for CMCP420VT



The CMCP420WF Waterproof Cable Fitting when used with the CMCP420LED, CMCP420BNC or CMCP420EL provides a waterproof instrument wire exit.